The Mobil SHCu2122 Gear series consists of fully synthetic industrial gear oils with outstanding performance. They are designed to provide excellent protection for gears and bearings, longer oil life even under extreme conditions, and contribute to trouble-free operation and increased customer productivity. These scientifically formulated synthetic oils are developed from synthetic base oils that have exceptional thermal and oxidation properties, as well as excellent flow properties at low temperatures. The high viscosity index of the oils provides less viscosity change with temperature variations, which results in a wider operating temperature range and easier start-up at low temperatures. The oils in the Mobil SHC Gear series contain an advanced additive system designed to provide excellent protection against conventional types of wear such as scuffing, in addition to high resistance to micropitting wear. Compared to the chemistry of conventional gear oils, these oils can improve the lubrication of the rolling bearings in the gearbox. The Mobil SHC Gear series offers outstanding rust and corrosion protection compared to conventional gear oils, even when the oils are contaminated with seawater. They show no tendency to clog fine filters, even at high water content, and have high compatibility with ferrous and non-ferrous metals u2013 even at high temperatures.

Class ISO VG 460 - Brookfield viscosity at -29 u00b0C, mPa.s, ASTM D2983 107 000 - Copper corrosion, 24 h, 121 u00baC, classification, ASTM D130 1B - Demulsibility, total free water, for EP oils, ml, ASTM D2711 84 - Density at 15.6 u00baC, g/ml, ASTM D4052 0.86 - Emulsion, time to 37 ml water, 82 u00baC, min, ASTM D1401 15 - FZG Micropitting, damage stage, classification, FVA 54 10 - FZG Micropitting, GFT class, classification, FVA 54 High - FZG scuffing test, damage stage, A/16.6/90, ISO 14635-1 (mod) >14 - FZG scuffing test, damage stage, A/8.3/90, ISO 14635-1 (mod) 14 - Flash point, Cleveland Open Cup, u00b0C, ASTM D92 234 - Foam, sequence II, stability, ml, ASTM D892 0 - Foam, sequence II, tendency, ml, ASTM D892 0 - Four-ball test, load-wear index, kgf, ASTM D2783 51 - Four-ball test, weld point, kgf, ASTM D2783 200 - Kinematic viscosity at 100 u00b0C, mm2/s, ASTM D445 54.1 - Kinematic viscosity at 40 u00b0C, mm2/s, ASTM D445 460 - Pour point, u00baC, ASTM D5950 -48 - Rust characteristics, procedure B, ASTM D665 PASS - Total acid number, mgKOH/g, ASTM D664 0.9 - Viscosity index, ASTM D2270 184